Subaru 2006 Legacy, Manual

Page: 3221 / 4302

4AT-47
Inhibitor Switch
AUTOMATIC TRANSMISSION
C: REMOVAL
1) Set the vehicle on a lift.
2) Set the select lever to “N” range.
3) Remove the air intake chamber.
<Ref. to IN(H4SO)-7, REMOVAL, Air Intake Cham-
ber.>
4) Disconnect the inhibitor switch connector.
5) Remove the inhibitor switch connector from the
stay.
6) Lift-up the vehicle.
7) Remove the front and center exhaust pipes.
<Ref. to EX(H4SO)-4, REMOVAL, Front Exhaust
Pipe.>
8) Remove the snap pin and washer from the range
select lever.
9) Remove the plate assembly from the transmis-
sion case.
10) Remove the three inhibitor switch securing
bolts.
11) Move the range select lever to the parking po-
sition (left side).
(A) Inhibitor switch connector
(A) Range select lever
(B) Snap pin
(C) Select cable
(D) Washer
AT-01350
(A)
AT-00034
(C)
(B)
(A)
(D)
(A) Select cable
(B) Plate ASSY
(A) Inhibitor switch
(A) Range select lever
AT-00035
( A )
( B )
(A)
AT-00036
(A)
AT-00037
asieps_tobira.book 47 ページ ２００９年１０月２６日 月曜日 午前９時１６分