Subaru 2006 Legacy, Manual

Page: 4003 / 4302

PS-53
Reservoir Tank
POWER ASSISTED SYSTEM (POWER STEERING)
8 . Reservoir Tank
A: REMOVAL
1) Drain fluid from the reservoir tank.
2) Disconnect the hose from reservoir tank.
CAUTION:
To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with clean cloth.
• H4 model
• H6 model
3) Remove the reservoir tank from the body.
B: INSTALLATION
1) Install the reservoir tank to the body.
Tightening torque:
13 N·m (1.32 kgf-m, 9.6 ft-lb)
2) Connect the hose to the reservoir tank.
• H4 model
• H6 model
3) Replenish power steering fluid up to the speci-
fied level. <Ref. to PS-54, Power Steering Fluid.>
C: INSPECTION
Check the reservoir tank for cracks, breakage or
damage. If a failure is found, replace the reservoir
tank.
(1) Reservoir tank
(2) Suction hose
(3) Return hose
(1) Reservoir tank
(2) Suction hose
(3) Return hose
PS-00770
(1)
(2)
(3)
PS-00625
(2)
(3)
(1)
(1) Reservoir tank
(2) Suction hose
(3) Return hose
(1) Reservoir tank
(2) Suction hose
(3) Return hose
PS-00770
(1)
(2)
(3)
PS-00625
(2)
(3)
(1)
asieps_tobira.book 53 ページ ２００９年１０月２６日 月曜日 午前９時１６分