Subaru 2006 Legacy, Manual

Page: 3787 / 4302

5MT-41
Transfer Drive Gear
MANUAL TRANSMISSION AND DIFFERENTIAL
E: INSPECTION
1) Bearing
Replace the bearings in the following cases.
• In case of broken or rusty bearings
• In case of worn or damaged bearings
• When the bearings fail to turn smoothly or emit
noise in rotation after gear oil lubrication.
2) Drive gear
If the drive gear tooth surface and shaft are exces-
sively broken or damaged, replace the drive gear.
3) Measure the clearance between snap ring and
inner race of ball bearing with a thickness gauge.
Clearance:
0.01 — 0.15 mm (0.0004 — 0.0059 in)
If the measurement is not within specification, se-
lect a suitable snap ring and replace it.
Snap ring (Outer-30)
Part number Thickness mm (in)
805030041 1.53 (0.0602)
805030042 1.65 (0.0650)
805030043 1.77 (0.0697)
MT-00138
asieps_tobira.book 41 ページ ２００９年１０月２６日 月曜日 午前９時１６分