Subaru 2006 Legacy, Manual

Page: 3897 / 4302

DI-31
Rear Differential (T-type)
DIFFERENTIALS
5) Keep the side bearing retainers separate to
make it possible to identify RH and LH sides. Re-
move the side bearing retainer attaching bolts, set
the ST to differential case, and extract the side
bearing retainers RH and LH with a puller.
NOTE:
Each shim, which is installed to adjusted the side
bearing preload, should be kept together with its
mating retainer.
ST 398457700 ATTACHMENT
6) Pull out the differential case assembly from dif-
ferential carrier.
NOTE:
Be careful so that the teeth do not hit against the
case.
7) When replacing the side bearing, remove the
bearing cup from the side bearing retainer using
ST.
ST 398527700 PULLER ASSY
8) Remove the bearing cone with ST.
NOTE:
• Do not attempt to disassemble the parts unless
necessary.
• Set the puller so that its claws catch the edge of
the bearing cone.
• Store so that the right and left side bearing races
and cones are not mixed together.
ST 18759AA000 PULLER ASSY
9) Remove the hypoid driven gear by loosening hy-
poid driven gear bolts.
10) Drive out the pinion shaft lock pin from hypoid
driven gear side (Model without LSD).
NOTE:
The lock pin is staked at the pin hole end on the dif-
ferential carrier. Do not drive it out forcibly before
removing the stake.
ST 899904100 STRAIGHT PIN REMOVER
ST
DI-00064
DI-00065
ST
DI-00066
DI-00316
ST
DI-00068
DI-00237
ST
asieps_tobira.book 31 ページ ２００９年１０月２６日 月曜日 午前９時１６分