Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 287 / 531

ECDIS User Guide Navigation Tools
65900012 6-3
To change the current sensor source for speed over ground, see SOG
Source Values.
Position Sensor
To change the current sensor source for position, see Position Values.
Depth Below Keel Sensor
To change the current sensor source for depth below keel, see Depth
Source Values.
Set and Drift Sensor
To change the current sensor source for set and drift, see Set and Drift
values.
Rate of Turn Sensor
To change the current sensor source for rate of turn, see Rate of Turn
Values.
Date and Time Sensor
Shows the current date and time and its source (usually GPS), see Date
and Time.
Wind Sensor
To view the current sensor source for wind, see Wind Values.
If your VisionMaster FT has been configured to utilize a sonar system the
Sensors menu will include
Sonar as a tab folder. For information on Sonar
view and settings refer to Chapter 5 `iView 3D’ in the Supplementary
Features User Guide, 65900014.