Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 315 / 531

ECDIS User Guide Alerts
65900012 7-17
Alert Type Description Priority Notes
Autopilot Interface
Failure
An interface to the autopilot has failed. Warning
Autopilot Power
Failure
Power supplied to autopilot has failed. Warning
Autopilot Power
Reduced
Power level supplied to autopilot has been reduced. Warning
Autopilot software
update needed
When in HDG or Joystick mode, autopilot will not automatically
adjust rudder bias. This can adversely affect steering accuracy in
significant currents or winds. Autopilot software update is available
to correct. Note - rudder bias is applied correctly when using the
NP4000 in AUTO mode and when operating in Track mode.
Caution
AZ Entry Target has entered an Activation Zone Warning
AZ Full Activation Zone Full Warning
Azimuth Error Number of azimuths per revolution has varied from its nominal
value of 4096
Warning
Backup Navigator Description text set at runtime. Emergency
Blank sectors invalid Tracker - blank sectors failed to configure Warning
Bow Crossing Limit Target has infringed bow crossing limits. Alarm
Bow Ground Speed
Unusable
Sensor Bow Ground Speed Integrity VisionMaster FT Alarm or
Caution
Depending on
configuration
Bypassed Critical
Point(s)
One or more critical points have been bypassed by temp route. Warning
Chart Available No chart displayed at the ship's position, but a chart is available for
the ship's position.
Warning
Chart Cautions Cautions found on the chart along the ship's present course. Alarm