Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 106 / 531

Basic Operation of ECDIS ECDIS User Guide
3-38 65900012
When a Goto location is applied TM limits are switched off and the motion
mode button displays
TM Limits Off . TM limits are re-enabled when the
following are selected:

Off Centre, Centre or MAX View

TM or Reset TM Limits from the Motion Mode button.
To create a new location do the following:
1. Right click at a selected position within the chart display and select
Goto.. from the popup window.
2. The Goto control window displays the L/L position selected. To
display the list of previously saved locations click on the drop down
arrow to the right of the
Locations field.
3. To create a new location based on the L/L position click on the
Create.. button, the new location name field shows { Auto-
Generate Name } .To generate a location name based on the
current date and time click the OK button.
4. To generate the location under another name click in the new
location name field, a keypad appears below the location field.
Enter a location name using the keypad, and when complete click
the
OK button.
5. The Goto.. control window reappears
with the saved location name in the
Location drop down list.
6. To enter revised coordinates for the new
location click in the LAT and LON fields,
a numerical keypad appears on the
menu area from where you can enter the
new L/L coordinates.
7. To assign the coordinates to the location click the Update button.
8. To move L/L position to the centre of the chart display click the Go
button. Own ship along with all other chart and target positions are
moved in accordance.