Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 429 / 531

ECDIS User Guide Targets
65900012 10-25
Identification
The target identification is displayed adjacent to each target’s vector origin
and remains visible as long as the target origin is visible. You can select
the target identification to display one of the following:
•
Num Target numbers only
•
Name
44
Target names only (the number will be displayed if no
name has been allocated).
•
Both Target numbers and names (the name will be left blank if
none has been allocated).
•
Off No identification
Past Position Dots
This area enables the display and editing of past position dots for all
targets, for information see Past Position Dots.
AUTO Drop Targets
This area enables auto drop targets to be enabled and the auto drop range
to be adjusted, for information see `AUTO Drop Targets’.
Other
The Vector Timeout check box should be ticked to ensure that the vector
True/Relative setting matches the Trails mode after the vector timeout of 30
seconds, see `Vector Modes’.
Number of Targets
The Number of Targets area includes data:
•
System Targets - this number represents all correlated targets
processed on the node (locally tracked and AIS).
•
Local Tracked - this number represents the total number of
tracked targets only on the node.
•
Total Tracked - appears on a multi-node system only. This number
represents all the tracked targets on all nodes of the system.
44
If the target has an AIS target associated with it and the AIS target has a name assigned,
this name will be used and may not be changed. Names assigned to targets will be distributed
across all nodes in the system.