Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 474 / 531

Radar ECDIS User Guide
11-12 65900012
Interswitch on Dual Radar
If your system is dual radar with an Interswitch,
the Interswitch window enables each display
radar channel to be associated with any one of
the transceivers in the system. A transceiver
can be selected from its associated channel as
a Master for controlling that scanner unit, or as
a Slave, if the other channel has selected the
same transceiver as the Master.
If different transceivers are selected for each
channel (e.g. TCVR (A) for Channel 1 and
TCVR (B) for Channel 2) then both
Transceivers may be set to
Master . If the same
transceiver is selected for both channels, then
one channel must be set to
Slave . For
example, if Master is selected on TCVR (B) for
Channel 2 where the same selection has been
made for Channel 1, then Channel 1 will
automatically switch to Slave.
The Status area displays the node identity with
Dual Radar in brackets. The current
Transceiver selection and Master/Slave status
for each display are displayed below the node
identity.