Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 445 / 531

ECDIS User Guide Targets
65900012 10-41
Test Tracked Targets on Dual Radar
On dual radar, test targets can be displayed
and tracked separately for each channel, or
selected for display and tracking on both
channels.
The Test Targets window for dual radar
includes all the functionality described
previously for single radar systems, but with the
addition or three tab buttons:
Channel 1 ,
Channel 2 and Both .
To enable test targets on a specific channel click the required Channel 1 or
Channel 2 button and define the test target values as described in Test
Tracked Targets.
If one radar channel is in Standby the test targets cannot be
enabled on the channel in Standby. All settings on that Channel
tab and Both tab will be disabled.
When test targets are displayed on a specific channel the channel’s
number appears next to the large stationary
X at the lower part of the chart
display.
To enable test targets on both channels click the
Both button, the window enables all test targets,
fixed test targets and moveable targets for both
channels to be switched on and off and
Reset All,
Reset All To Defaults to be made.
When test targets are displayed on both channels
the numbers
1 and 2 appear next to the large
stationary X at the lower part of the chart display.