Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 428 / 531

Targets ECDIS User Guide
10-24 65900012
Target Display
The Target Display window shows the display
parameters for all targets.
In addition to the Targets menu the target
display window can be quickly accessed by
right clicking on the AIS icon on the upper
toolbar and selecting
Target Display.
If the ECDIS has video overlay, targets are only
displayed when the system is in Transmit. If the
system is switched to Standby then all targets,
with the exception of AIS targets, are dropped.
Targets can be tracked either manually or
automatically by auto acquisition, see Activation
Zones.
The Target Display window is divided into the
following areas:
•
Target Display (including Display Priority)
•
Identification
•
Past Position Dots
•
AUTO Drop Targets
•
Other (Vector Timeout)
•
Number of Targets
Target Display
The Display Targets check box controls the viewing of all targets on the
display. Tick the check box to view all targets (default), or untick to remove
the targets from the display.
Display Priority can be toggled between AIS targets and tracked targets,
the default selection is AIS Priority. Toggling between these options will
control whether a correlated AIS/Tracked target is displayed as an AIS
target or a tracked target. Refer to Targets and AIS Targets in the Targets
Chapter. The display of uncorrelated targets is unaffected.