Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 313 / 531

ECDIS User Guide Alerts
65900012 7-15
Alert Type Description Priority Notes
3D Chart Suppressed 3D Chart not supported for this region. Warning
Absolute Humidity
Unusable
Sensor Absolute Humidity Integrity VisionMaster FT Alarm or
Caution
Depending on
configuration
Active AIS Almost Full Activated AIS Target Limit Almost Reached Caution
Active AIS Full Activated AIS Target Limit Reached (maximum 40) Warning
Actual Course Change Actual course change alert issued based on wheel-over TTG. Warning
Actual Course Change Actual course change alert issued based on wheel-over TTG.
Operator messages will be inhibited until alert is acknowledged.
Alarm
Actual Fuel usage
Value Error
Actual Fuel usage value is below the threshold value Warning
Actual Speed Value
Error
Actual Speed value is below the threshold value Warning
Adjust for Set and
Drift Failure
Track control no longer computing set and drift correction due to
degraded state of one or more data types:
True Heading, Water Speed, Position, Rate of Turn.
Warning
AFC Mode Error The AFC mode of the transceiver is in conflict Warning
Aggregated Generic
Data Unusable
Sensor Aggregated Generic Data Integrity VisionMaster FT Alarm or
Caution
Depending on
configuration
AIS Almost Full The number of AIS targets is about to exceed system capacity. Caution
AIS Communication
Failed
Communication with the AIS unit has failed. AIS targets are not
available.
Warning
AIS Degraded AIS degraded because DR'ing Warning
AIS Disabled Ownship position is being dead reckoned, datum is invalid or
Ownship heading is unusable.
Warning