Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 480 / 531

Brilliance ECDIS User Guide
12-2 65900012
Day and Night Modes
The Day / Night modes function enables you to
select the correct colour setting for optimum
display purposes in various lighting conditions.
The colour modes include two daylight settings,
one dusk setting and one night time setting. The
current setting is shown with its radio button
highlighted.
To select a different setting click on the radio
button to the left of the setting, the screen colours change relevant to the
day, dusk or night mode selected.
Alternatively, click on the Up/Down BRILL buttons on the Control Panel to
brighten or darken the colour setting.
If the colour setting is changed from Day Bright/Black or Dusk to Night the
system displays a warning requesting confirmation of the change in setting.
To confirm click the
Yes button on the Warning window, or click the No
button to cancel. If no confirmation is given within 10 seconds the system
reverts to the previous colour setting.
Multi-node Settings
On a multi-node system changes to the day/night settings on one node are
applied to all other nodes on the system.
The commissioning engineer may configure a node not to be affected or
capable of making a global day/night setting change, and in this case the
setting will be applied to the local node only.