Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 377 / 531

ECDIS User Guide Routes
65900012 8-43
Monitoring Speed Planning
When the required selections have been made
to the speed plan click the
Begin Monitoring
button, the plan is locked and the system
begins monitoring based on the speed plan.
The following read-only values, configured in
the speed planning setup window, are
displayed in the Speed Planning window:
•
Speed Command Setting - the current
speed command as selected in Speed
Planning Setup.
•
Arrival WPT - selected arrival
waypoint, or last waypoint on route.
•
Intended Arrival Time - the arrival
date/time and TTG specified in the
Ordered column of Speed Planning
Setup.
•
List of Leg/Turn segments and
specified Speed Commands
•
Estimated Arrival Time - the arrival
time based on the speed commands
presented in this window.
To change the speed command values click the Edit Speed Plan button,
the Speed Planning Setup window reappears.
When speed orders and/or arrival times are changed in Speed Planning
Setup the
Begin Monitoring button must be clicked again in order to
initiate the revised values.