Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 35 / 531

ECDIS User Guide Overview
65900012 1-13
Ship’s heading and
speed display
Compass alignment.
Selection of speed mode (through water or over
ground).
Selection of water or ground stabilisation
Selection of Sensor
Source Selection of sensor source for data type
(heading, STW , position etc.)
Selection of
presentation mode
North-up or Course-up
Motion Mode True Motion (TM) only
Selection of vector
mode
Selection of true ( T ) or relative ( R ) vectors.
Selection of vector time.
Chart Facilities
Enables vector and raster charts installed from
an installer facility to be displayed.
Chart feature sets can be customised and
manually updated by the operator.
Chart Symbols Colour
Diagram
Ensures any adjustments made to brightness
and contrast settings will enable chart symbol
SENC data, such as coastlines, safety contour
and other objects to be adequately displayed.
Defining and displaying
EBLs, VRMS & ERBLs
Two electronic bearing lines – EBL 1 & EBL 2.
Two variable range markers – VRM 1 & VRM 2.
Each EBL/VRM pair can be displayed as a
combined ERBL – ERBL 1 and/or ERBL 2.
Extensive alert
indications
(Alarms, Warnings and
Cautions)
Displaying the current unacknowledged alert
with highest priority in the alert status indicator.
Facility for acknowledging alerts in a status
indicator.
Display all alerts, listed in groups of alarms,
warnings and cautions, or sorted by group.
Alert buzzer facility.
Watch alarm facility.
Temporary and
Permanent prompts Both Temporary and Permanent prompts are
displayed below alerts.