Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 389 / 531

ECDIS User Guide Routes
65900012 8-55
The following parameter default values apply to each SAR pattern:
Parameter Default Pattern
Length 5 NM Creeping Line, Parallel Line
Width 2 NM Creeping Line, Parallel Line, Expanding Box
Separation 1 NM Creeping Line, Parallel Line Expanding Box
Sector Width 5 NM Sector Search
4. To change the pattern parameters refer to step 1 above.
5. To change the orientation of the SAR pattern click the Port or
Starboard radio button.
6. To change the leg type from the default Rhumb Line click on the drop
down button and select Great Circle .
7. To restore the setting values to the default parameters click the Reset
button.
8. To clear a SAR pattern from the display click the Clear button.
9. To save changes made to a SAR pattern click the Save button and
enter a name for the SAR pattern route.