Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 232 / 531

Navigation Tools ECDIS User Guide
5-6 65900012
Editing PI Line Styles
To edit a PI line style do the following:
A different line style for each PI line may be selected, or a line style may be
applied to all lines in the set.
To select a line style for each PI line:
1. Click on the drop down list next to the
current line style (defaults to Solid ), the PI
line is automatically selected and a list of
line styles are displayed as numerical
indicators.
2. Select the preferred line style from the list, each style is a variation
of line dashes.
3. The line's style is changed to the selected option on screen.
To apply a line style to all PI lines in the set:
1. Click on the drop down arrow next to the
Apply for Set button, the same list of line
styles appears as described above.
2. Select the line style to be applied to all
lines in the set and click the Apply for Set button. Any individual
line styles previously selected are overridden by this command.
You can edit the line bearing and range in either of the following ways:
1. Move the cursor over the PI line, the cursor changes to the
following symbol
2. Hold down the left key and use the trackball to pivot the
line around own ship’s CCRP, the bearing angle value in
Line Data automatically changes as the line bearing is
moved.
3. To adjust the line range move the cursor over the middle
of the line where a small centre line bisects at the CCRP.
The cursor changes to the following symbol
4. Hold down the left key and move the trackball left or right to adjust
the range of the line to either side of the CCRP.
Or:
Click on the line bearing and range fields in the Line Data area, the
values change to green (editable). Move the trackball to change
the data values, the NM range value denotes the distance of the
line to the CCRP (defaults to 0.0) and the bearing values denote
the angle from 000°.