Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 519 / 531

ECDIS User Guide System
65900012 13-35
Shutdown
The Shutdown facility enables the operator to
shut down or restart a single node, or all nodes
on the system.
In Operator mode, the Service Mode
and Service Mode All buttons will be
greyed out. They will only be available if
the current operator is logged on as a
Service Engineer.
Restart System is selected if for whatever
reason the operator requires to restart their
particular node on the system. The node will first
power down and then restart. Other nodes on the
system will not be affected.
Shutdown System is only selected when the
operator requires shutting down their particular node on the system for a
prolonged period of time. Other nodes on the system will not be affected.
Restart All Systems is selected if for whatever reason the operator
requires to restart all the nodes on the system.
When Restart All Systems is selected an Action
Required message appears prompting to enter
CONFIRM in the box below. To proceed enter
CONFIRM (not case dependent) and click the OK
button. All nodes on the system will first power down
and then restart.
Shutdown All Systems is selected if for whatever
reason the operator requires to shut down all the
nodes on the system for a prolonged period of time.
When Shutdown All Systems is selected the Action Required message
appears. Enter the same password as described above.