177
CL-6 INPUT CONTROLLER
Trim Levels (688 only)
When the CL-6 is attached to the 688, the mini-faders on the 688 become dedi
-
cated trim controls for inputs 7-12.
To adjust the trim level for inputs 7-12:
X
Turn the appropriate mini-fader on the 688. The trim gain is displayed on
the mixer’s LCD via the Input Settings screen.
Trim Levels (664 only)
When the CL-6 is attached to the 664, the mixer’s SELECT encoder may be used
to adjust trim for inputs 7-12 via the Input Settings screen.
To adjust the trim level for inputs 7-12:
1. Slide the input’s PFL switch on the CL-6 to the right to access the Input Set
-
tings screen on the mixer’s LCD.
2. Turn the SELECT encoder to adjust trim for the input. The trim gain is dis
-
played on the mixer’s LCD.
Using High-pass Filters
The High-pass Filter button on the CL-6 is a toggle, which turns the high-pass
filter off or on to a predefined setting of 150 Hz.
i
On the 688, the high-pass filter may be adjusted to other frequencies via the Input
settings; however, if the button on the CL-6 is used, high-pass filtering is turned
on at a set frequency of 150 Hz.
To turn on an input’s high-pass filter:
X
Press the High-pass Filter button associated with the input.
The High-pass Filter LED illuminates amber when high-pass filtering is on.
i
Press the button again to turn off the high-pass filter.
Summary of Contents for 664
