Sound Devices 664 User Manual Download

Page: 137 / 183

137

THIRD-PARTY REMOTE CONTROL

Web-based Wireless Remote Control

All 6-Series mixers support web-based wireless remote control via PC or Mac

computers and mobile devices, such as Android or iOS smart phones or tablets,

that have a web interface.
This integration does require the following third-party hardware and software:

arDware

/ s

oFtware

escription

ACN-ML Master Lockit

The Master Lockit by Ambient

Recording is the control center

of the ACN timecode and metadata network. Acting as the

network central hub, it enables remote control of all ACN units

on set via browser on any WiFi capable device. In addition, it

collects all metadata from script, continuity, and professional

cameras for delivery and use by DITs and post production.
Firmware v4.10 or later required.
For timecode connection, connect the Master Lockit TC to the

mixer’s TC via 5-pin Lemo cable (not shown).

Using the MLC-HID—a 5-pin Lemo to USB-A cable, available

from Ambient—connect the ACN-ML Master Lockit to the

mixer’s USB port (or to a CL-12’s USB keyboard port).

When connecting directly to the mixer instead of to the CL-12,

a USB A (female) to B (male) adapter is also necessary.

Web Browser

Ensure that your computer or mobile device has a web

browser and WiFi.

Refer to Ambient Recording documentation for more information on how to set up

the ACN-ML Master Lockit and use its web-based feature for controlling the mixer.

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands