manualshive.com logo in svg

Sound Devices 664, User Manual

Share
Download
Sound Devices 664 User Manual Download Page 12

User Guide

12

Left Side Panel

XLR Inputs

TA3 Inputs

Headphone Outputs

Slate Mic Input

F

eature

D

escription

XLR Inputs

Active-balanced analog microphone- or line-level inputs. Inputs 1 and 

6 can also accept AES3 or AES42 (Mode 1) signal.

[Pin-1 = ground, pin-2 = hot (+), and pin-3 = cold (-)]

TA3 Outputs 1-6 /

Inputs 7-12

Balanced direct outputs (1-6); these connections can optionally be 

selected as analog line-level inputs (7-12).
[Pin-1 = ground, pin-2 = hot (+), and pin-3 = cold (-). Float pin 3 to 

unbalance.]

Headphone Outputs

3.5mm and 1/4” TRS headphone outputs. Can drive headphones from 

8 to 1000 ohm impedances to very high levels.
[Tip = left, ring = right, and sleeve = ground]

Slate Mic Input

TA3 input for connecting external slate microphone. 

 

[Pin-1 = ground, pin-2 (+), pin-3 (-)]

Summary of Contents for 664
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands