Sound Devices 664 User Manual Download

Page: 42 / 183

User Guide

Adjustment

Indicator

Outputs during gain adjustment

Linked outputs

To adjust output gain:

1. Press the METERS button repeatedly until a meter view is visible that dis

plays the master bus (L/R) and auxiliary bus (X1/X2).

Up to three meter views are available, as configured via the main menu option

SYSTEM > Meter Views.

2. Turn and press the SELECT encoder to choose an output and enter Gain

Adjustment mode. The background color of the chosen output becomes

orange, and the output gain value is displayed in the lower-right corner of

the screen.

3. Turn the SELECT encoder to adjust the output gain. Outputs that are linked

will be shown as a connected box, and their gain is adjusted simultaneously.

If no adjustments are made within a few seconds, the selection will cancel.

4. Press the SELECT encoder or wait two seconds to exit Gain Adjustment

mode.

Accessing Output Settings

The Main menu has a sub-menu of settings related to outputs. These may be

used to customize the configuration of the 664 outputs.

To access Outputs sub-menu:

1. Press the MENU button.

2. Turn and press the Headphone encoder to select OUTPUTS.

menu

escription

ptions

Linking

Choose which output pairs (L/R and

X1/X2) are linked for the purpose of arm

ing and level adjustment.
Unlinked pairs are separated by commas.

By default, only the L/R pair is linked

(LR, X1, X2).

•

LR, X1X2

•

LR, X1, X2

•

L, R, X1X2

•

L, R, X1, X2

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands