Sound Devices 664 User Manual Download

Page: 168 / 183

User Guide

168

ption

escription

Q-Factor

Set to one of four values: 0.707, 1.0, 1.414, 2.0. This affects all EQ

bands.
For more information, see

Setting the Q-Factor.

LF Freq

Values range from 60 Hz to 300 Hz. Default is 100 Hz. This may be

adjusted individually for each channel.

HF Freq

Values range from 8 kHz to 16 kHz. Default is 10 kHz. This may be

adjusted individually for each channel.
For more information, see

Setting LF and HF Frequency Defaults

LF Filter Type

Set to either Peaking or Shelving. This may be adjusted individually

for each channel.

HF Filter Type

Set to either Peaking or Shelving. This may be adjusted individually

for each channel.
For more information, see

Setting LF and HF Filter Types

EQ Routing

Set to either Pre-fade or Post-fade. This affects all input channels.
For more information, see

Setting EQ Routing

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands