45
OUTPUTS
Output Routing
Any input (1-12) may be routed post-fade to the auxiliary outputs (X1 and X2).
Only inputs 1 and 6 may be routed pre-fade. For more information, see
.
The master L and R tracks are permanently routed to their respective outputs,
unless the connections have been set to AES, in which case they use AES out
-
put routing.
Accessing AES Output Routing Screen
There is a total of 8 channels of digital output on 4 connections. Each of the
XLR-3M or 10-pin A outputs can be configured to output AES3 digital signals.
Setting Output Type and Nominal Level
Any track can be routed to any AES output in any combination. No sources are
assigned to any of the 8 AES outputs by default.
To access the AES Output Routing screen:
1. Press the MENU button.
2. Turn and press the Headphone encoder to select OUTPUTS > AES Output
Routing.
Configuring AES Output Sources
The AES Output Routing screen consists of rows that represent each AES output
and columns that represent the available source for those outputs.
Routed source
Unrouted source
Highlight
To configure output sources in the AES Output Routing screen:
1. Do one of the following:
X
Turn the Headphone encoder to move the orange highlight horizontally.
X
Turn the Select encoder to move the orange highlight vertically.
2. Press the Headphone or Select encoder to change the selected source be
-
tween Off (black) and On (blue).
Summary of Contents for 664
