manualshive.com logo in svg

Sound Devices 664, User Manual

Share
Download
Sound Devices 664 User Manual Download Page 56

User Guide

56

Changing the MP3 Bit Rate

The 664 records MP3 files at a default bit rate of 320kbs, but that bit rate may 

be changed. A high bit rate MP3 file preserves more audio information with an 

increased file size. A low bit rate MP3 file preserves less audio information with 

a decreased file size.

To change the MP3 bit rate:

1.  Press the MENU button.

2.  Turn and press the Headphone encoder to select RECORDER > MP3 Bit 

Rate.

3.  Turn and press the Headphone encoder to select a bit rate. Options include: 

128, 192, and 320 kbs.

Setting the Sample Rate

The 664 records WAV files at 48 kHz sample rate by default.

To set sample rate:

1.  Press the MENU button.

2.  Turn and press the Headphone encoder to select RECORDER > Sample Rate.
3.  Turn and press the Headphone encoder to select a sample rate. Options in

-

clude: 44.1k, 47.952k, 47.952kF, 48k, 48.048k, 48.048kF.
The sample rate value is stored in file metadata. Those options with “F” are 

F mode rates. The F stands for “faux” or “Fostex”.

F Sample Modes

The 48.048kF mode is used in specific work flows with Avid

®

, Final Cut Pro

®

, 

and other post-production environments that do not recognize audio files writ

-

ten at 48.048 kHz. In this mode files are recorded at a 48.048 kHz sampling 

rate but are stamped at 48 kHz. When played, they will play back 0.1% slower 

than real time. 
One use for the 48.048kF mode is to force a 0.1% speed reduction (pull down) 

of audio to match MOS-telecined film (24 fps-to-NTSC) in non-linear edit sys

-

tems, such as Avid or Final Cut Pro. Since the file is stamped as a 48 kHz file, 

the edit system will play it back at 48 kHz and not at 48.048 kHz. This “audio 

pull down” will match the transferred picture without the need for an intermedi

-

ate step through other software to create the pull down. 
When using 48.048kF sample rate, set main menu option TIMECODE > Frame 

Rate to 30ND or 24. When set to 30ND, files will be stamped with a frame rate 

of 29.97. When set to 24, files will be stamped with a frame rate of 23.97ND. 

Summary of Contents for 664
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands