manualshive.com logo in svg

Sound Devices 664, User Manual

Share
Download
Sound Devices 664 User Manual Download Page 18

User Guide

18

c

ategory

D

escription

QUICK SETUP

Allows user to save and recall user settings to and from SD, CF, and 

internal memory. Also allows resetting all settings to factory default. 

See 

Quick Setup

 for details.

Customizing the LCD and LEDs

Because the 664 is a portable field mixer, it may be used in a variety of environ

-

ments, including some where lighting is an issue that requires adjustments to 

the mixer. With some System settings, you can modify the brightness levels of 

the LCD, the brightness levels of the LEDs, and even enable or disable the LCD 

Daylight mode.

To set the LCD brightness level:

1.  Press the MENU button.

2.  Turn and press the Headphone encoder to select SYSTEM > LCD Brightness.
3.  Turn the Headphone encoder to change the value from 10 to 100%. Then 

press the encoder to make your selection. 
By default, the LCD brightness level is set to 100%.

To set the LED brightness level:

1.  Press the MENU button.

2.  Turn and press the Headphone encoder to select SYSTEM > LED Brightness.
3.  Turn the Headphone encoder to change the value from 5 to 100%. Then 

press the encoder to make your selection. 
By default, the LED brightness level is set to 60%.

Using LCD Daylight Mode

The default appearance of the LCD screen is a dark theme. However, a 

 

lighter theme is available as an alternative mode, which can make viewing in 

bright conditions easier. When enabled, the LCD Daylight mode may be toggled 

between dark and light themes.

To enable or disable LCD Daylight mode:

1.  Press the MENU button.

2.  Turn and press the Headphone encoder to select SYSTEM > LCD Daylight 

Mode.

3.  Do one of the following:

 

X

Select On to enable.

 

X

Select Off to disable.

Summary of Contents for 664
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands