manualshive.com logo in svg

Sound Devices 664, User Manual

Share
Download
Sound Devices 664 User Manual Download Page 156

User Guide

156

F

eature

D

escription

R Routing Indicator

Illuminates when the input channel has been routed to the right bus.

• 

Off = not routed 

• 

Yellow = post-fade routing

X2 Routing Indicator

Illuminates when the input channel has been routed to the X2 output. 

• 

Off = not routed 

• 

Green = pre-fade routing

• 

Yellow = post-fade routing

SEL Button

Selects or deselects an input channel, or multiple input channels for 

adjustment. 
Each SEL button illuminates when a channel is selected. 
While selected, an input channel may be routed to L, R, X1 or X2. 

It also may be turned on, armed, or named. Additionally, high-pass 

filtering, phase inversion, or EQ may be applied.
For more information, see 

Selecting One or More Input Channels

. See 

also 

Setting SEL to follow PFL

.

ON Indicator

Illuminates yellow to indicate the input channel is on.

ARM Indicator

Illuminates red to indicate the corresponding isolated track (ISO) is 

armed for recording.

MIXASSIST Indicator

 

Illuminates to indicate auto-mixing activity. When the input is open, 

the LED is green. As the input closes, the LED is turned off.

PFL Buttons

 

(Pre-/Post-Fade Listen)

Activates or deactivates pre- or post-fade listen of inputs 1-12 to the 

headphone monitor.  

 

For more information, see 

Activating PFL of an Input

. See also 

Setting 

SEL to follow PFL

.

Linear Faders

100 mm low latency linear controls for adjusting the fader levels of 

inputs 1-12. Ranges from Off, - 80 to +16 dB.  
Each input’s linear fader gain is displayed on the mixer’s Input 

Settings screen. Calibrate linear faders to 0 dB via the mixer’s 

SYSTEM > Fader/Pan Calibration menu.

LED Meters

Displays 7-segment pre- or post-fade metering, plus pre- and post-

fade limiter LED indicator for input channels 1-12. 

Summary of Contents for 664
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands