Sound Devices 664 User Manual Download Page 43

Page: 43 / 183

OUTPUTS

menu

escription

ptions

XLR-L Out

Select the nominal level of analog output

or switch the output to send AES3 dig-

ital signal on the L XLR-3M output. The

default is Line.

• Mic

•

Line

• -10

• AES 1,2

XLR-R Out

Select the nominal level of analog output

or switch the output to send AES3 dig-

ital signal on the R XLR-3M output. The

default is Line.

• Mic

•

Line

• -10

• AES 3,4

10-pin A Out

Select the analog output level or engage

AES3 digital on both balanced outputs of

the 10-pin A output. The default is Line.

• Mic

•

Line

• -10

• AES 5,8

10-pin C Out

Select the analog output level on both

balanced outputs of the 10-pin C output.

The default is Line.

• Mic

•

Line

• -10

TA3-L Out

Select the analog output level of the L

TA3 output. The default is Line.

• Mic

•

Line

• -10

TA3-R Out

Select the analog output level of the R

TA3 output. The default is Line.

• Mic

•

Line

• -10

TA3-X1 Out

Select the analog output level of the X1

TA3 output. The default is Line.

• Mic

•

Line

• -10

TA3-X2 Out

Select the analog output level of the X2

TA3 output. The default is Line.

• Mic

•

Line

• -10

Direct Out Levels

Select the analog output level of the TA3

direct outputs. The default is Line.

• Mic

•

Line

• -10

Direct Out Pre/Post

Globally select pre- or post-fader signal

source for all direct outputs. By default,

direct out is set to PreFade.

• PreFade

• PostFade

Tape Out Source

The source for the unbalanced 3.5mm

Tape Out. By default, this source is set

to L/R; however, it can be used to send

incoming RTN signals. This is useful for

sending an IFB wireless feed of the RTN

audio to the producer for video playback.

•

L/R

•

RTN A

•

RTN B

•

RTN C

AES Output Routing

Displays the AES output routing matrix

where sources can be assigned to AES

output channels.

For more informa-

tion, see

Accessing

AES Output Routing

Screen

Playback to Outputs

Select destination for playback signal. By

default, playback is set to All Outputs.

•

Headphones Only

•

All Outputs

Configuring Output Linking

Output linking allows the gain, delay, and track arm status (L, R, X1, X2 only) of

an output pair to be controlled with only one action. By default, the output gain

of L/R are linked and X1/X2 are unlinked.

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Brands by name

Popular brands