Sound Devices 664 User Manual Download Page 46

Page: 46 / 183

User Guide

Routing Tape Output

The 664 includes two unbalanced tape-level outputs, a TA3 connector and a

3.5 mm jack. These two connectors are resistively in parallel and are isolated

from the balanced outputs.
Tape Output is often used to send signal from a camera to a producer or

director over an IFB. The default source for Tape Output is the master L and R

tracks. However, any return signal can be routed to the Tape Output instead.

To configure the Tape Output source:

1. Press the MENU button.

2. Turn and press the Headphone encoder to select OUTPUTS > Tape Out

Source.

3. Choose a source to be routed to Tape Output. Options include: L/R, RTN A,

RTN B, or RTN C.

RTN C

RTN B

RTN A

L/R

Enabling Playback to Outputs

By default, audio on L and R recorded tracks will be sent to the headphone out

puts and both L and R outputs during playback. This can be disabled so that LR

analog outputs do not send the playback signal to the L and R outputs.

To enable or disable playback to outputs:

1. Press the MENU button.

2. Turn and press the Headphone encoder to select OUTPUTS > Playback to

Outputs.

3. Turn and press the Headphone encoder to select either Headphones Only or

All Outputs.

WAV files recorded on the 664 will play back to tracks as they were recorded. MP3

files recorded on the 664 always play back to the L and R tracks.

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands