Sound Devices 664 User Manual Download

Page: 179 / 183

179

Included:

•

CS-688 Production Case

•

Detachable Windowed Cover

•

High-quality Shoulder Strap

Features

Manufactured by Portabrace for Sound

Devices, this production case with

included shoulder strap was designed

for use with the 688 or 664 Field

Production Mixers, as well as attachable

accessories, such as the SL-6 powering

and wireless system and the CL-6 input

expansion controller.
The case is reversible, so the mixer may

be positioned anywhere inside for easy

access and versatility.

The production case is made from durable 1000 denier nylon and padded over rigid

internal plastic framing for extra protection, shock resistance, durability, and

temperature insulation. Other features include:

•

Waterproof nylon exterior with layer of

anti-skid material on bottom of case

•

Adjustable dividers for main compartment

and front pocket

•

Pockets on each side for wireless

transmitters and receivers

•

Microphone power supply pocket

• Quick zipper access to cable ports on

either side of case

Specifications

ame

escription

Dimensions (Interior)

12.8 in x 6.5 in x 8.0 in

32.4 cm x 16.5 cm x 20.3 cm

Weight

4.6 lbs

2.1 kg

CS-688

Production Case for 688 or 664

Published in Reedsburg, WI USA • www.sounddevices.com • Tel: (608) 524-0625 • Email: [email protected]

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands