Sound Devices 664 User Manual Download

Page: 15 / 183

Topics in this section include:

The LCD and User Interface

Meter Views

The LCD display is the primary source

of information when operating the 664.

All settings are configured via the LCD

display. All signal level meters can be

displayed on the LCD display.
This chapter describes meter views,

including the Main screen which is

displayed when no other screens

are active, the Main menu, and LCD

Daylight mode.
Other screens are described where

applicable throughout the guide.

The 664 displays important metering information at a glance on its LCD. All

meter views provide various combinations of input, track, and return meters. By

default, the first of three meter views is shown. This view is known as the Main

screen.

Current Take

Active playback media

Media time remaining and audio file format

Power source and level

Input limiting activity

Monitor (Headphone) information.

RTN levels

Sample rate information

Absolute recording time

SMPTE timecode

Powered off input

Armed track

Unarmed track

Meter View

Of the three meter views, two are predefined for the 664 are:

•

LR, X1X2, 1-6 — This meter view (shown above) shows left, right bus tracks

as well as all 12 input tracks.

•

LR, X1, X2, RTNs — This meter view shows left, right, X1, and X2 bus

tracks, plus all returns.

•

Off — The third meter view is off by default, but may be set to a variety of

available combinations.

Meter Views

Using Meter Views

Customizing Meter Views

Accessing the Main Menu

Customizing the LCD and LEDs

Using LCD Daylight Mode

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands