Sound Devices 664 User Manual Download

Page: 21 / 183

Topics in this section include:

Headphone Monitoring

Connecting Headphones

The 664 provides two headphone

outputs on its left panel, several options

for headphone sources including up to

10 custom presets, plus a variety of

other customizable features related to

audio monitoring.

Connect headphones to either the 1/4-inch or 3.5mm headphone outputs, lo

cated on the left panel of the 664.

⚠

The 664 can drive headphones to dangerously high vol-

umes. Turn down the headphone gain before attaching

headphones or selecting a headphone source to prevent

accidental high levels. The range for headphone levels

may be set from OFF, -30 dB to +20 dB.

To adjust Headphone gain:

Turn the Headphone encoder.
While adjustment is in progress, the gain value will be

displayed in the lower-right corner of the Main screen

next to the Headphone Source icon.

1/4”

3.5mm

Connecting Headphones

Selecting Headphone Source

Setting Headphone Encoder Mode

Configuring the Headphone Preset List

Defining Custom Headphone Presets

Using Headphone Source Shortcuts

Headphone Peak LED

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands