Sound Devices 664 User Manual Download Page 175

Page: 175 / 183

175

Topics in this section include:

CL-6 Input Controller

Front Panel

The CL-6 input controller is an optional,

input-expansion accessory available for

use with Sound Devices 688 or 664.
The CL-6 adds dedicated front panel

controls, including six full-sized fader

controls, PFL control, and high-pass

filter controls for inputs 7 through 12.

Other features include large, daylight

viewable LED track meters with track

arm indicators for tracks L, R, X1 and

X2, plus additional recording controls.

Instructions for attaching the CL-6 to

a mixer are provided in the

CL-6 Quick

Start Guide

, shipped with the accesso-

ry. The guide is also available for down-

load as a PDF from the Sound Devices

website.

The front panel has the following features:

Input Fader

L Mix

Indicator

Input

LED

PFL Switch

R Mix

Indicator

High-pass

Filter Button

High-pass

Filter LED

Stop Button

Record Button

Bus Track Arm LEDs

Bus Track Meter LEDs

eature

escription

Input Fader

Primary control for adjusting the fader levels of inputs 7-12. Ranges

from OFF to +16 dB. Nominal setting is in the middle (0 dB).

High-pass Filter Button

Toggles activation of high-pass filter, per channel.

High-pass Filter LED

Illuminates amber to indicate high-pass filter is engaged, per chan

nel.

Front Panel

Top and Bottom Panels

Trim Levels (688 only)

Trim Levels (664 only)

Using High-pass Filters

Quick Routing of L and R Tracks

Specifications

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands