Sound Devices 664 User Manual Download Page 178

Page: 178 / 183

User Guide

178

Quick Routing of L and R Tracks

With the CL-6, you can quickly route an input to the left or right mix bus.

To route an input to L or R mix bus:

1. Hold down the input’s High-pass Filter button.

2. Then, with that button held down, do either of the following:

Slide the Input Select switch left to route the input to the L mix bus.

Slide the Input Select switch right to route the input to R mix bus.

The L and R Mix Indicator LEDs illuminate blue when the input is routed to

the respective mix bus.

Specifications

The following specifications apply to the CL-6.

ame

escription

Powering

system.

Size (H x W x D)

1.75 in x 10.2 in x 2.25 in

5.3 cm x 32 cm x 19.8 cm

Weight

21.5 oz

2.21 kg (unpackaged, without batteries)

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands