manualshive.com logo in svg

Sound Devices 664, User Manual

Share
Download
Sound Devices 664 User Manual Download Page 167

167

CL-12 LINEAR FADER CONTROLLER

When EQ is applied to a selected input, the EQ screen also appears for the 

selected input on the mixer’s LCD. For instance, in the following example, EQ 

is applied to channel 1 (CH-1); LF is set at 10 dB and HF is set to -10 dB, while 

MID frequency and gain are bypassed. In the example, high-pass filtering is off, 

the Q-factor is set to 1.0 and both LF and HF filtering is set to Peaking.

It is not possible to adjust EQ for multiple inputs at the same time. When 

multiple input channels are selected, the channel that is adjusted will be the 

last one added to the group.
There is a 10-second timeout on the EQ screen, if nothing is adjusted. 

 

i

Press and hold an input’s SEL button while pressing any of the EQ encoders to view 

the input’s EQ screen without changing the input’s EQ value.

Accessing the EQ Submenu

Several settings related to EQ—such as Q-factor, EQ routing, and so forth—may 

be configured via the EQ submenu.

To access the EQ submenu:

1.  Press MENU.

2.  Select CL-12 > EQ. The EQ submenu appears.

Summary of Contents for 664
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands