manualshive.com logo in svg

Sound Devices 664, User Manual

Share
Download
Sound Devices 664 User Manual Download Page 123

123

WINGMAN WIRELESS INTERFACE

Using Meter Views

As part of the main screen, metering is displayed with track names 

superimposed over the meters. In Wingman, there are three pre-configured 

meter views available within the Transport view. 
In most cases, meters appear vertically in the Transport view; however, on the 

688 or 664 as shown below, when the left and right bus tracks are displayed 

with ISOs, only the ISOs (1-12) are vertical, while the left and right bus tracks 

(LR) are positioned horizontally. 

At the bottom of each vertical meter—or far left for horizontal meters—a 

rectangular label appears with a track identifier, such as L for left bus, 1 for 

Input 1, and so forth. The label’s background color changes based on whether 

a track is on, off, armed or disarmed. For more information, see 

Arming/

Disarming Tracks

.

Limiter indicators also appear on each meter when activated. 

 

i

For the 688 only—circle icons also appear as activity indicators when either auto 

mixer, MixAssist™ or Dugan, is turned on. 

Summary of Contents for 664
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands