manualshive.com logo in svg

Sound Devices 664, User Manual

Share
Download
Sound Devices 664 User Manual Download Page 163

163

CL-12 LINEAR FADER CONTROLLER

Pan

Mini-Fader (7-12) 

becomes Trim when 

CL-12 is connected

Trim (1-6)

Adjusting Trim Levels (688 only)

When the CL-12 is attached to the 

688, the mini-faders on the 688 

become dedicated trim controls for 

inputs 7-12. 

To adjust the trim level for 

inputs 7-12:

 

X

Turn the appropriate mini-

fader on the 688. The trim 

gain is displayed on the 

mixer’s LCD via the Input 

Settings screen.

Adjusting Trim Levels (664 only)

When the CL-12 is attached to the 664, the mixer’s SELECT encoder may be 

used to adjust trim for inputs 7-12 via the Input Settings screen. 

To adjust the trim level for inputs 7-12:

1.  Slide the input’s PFL switch on the CL-6 to the right to access the Input Set

-

tings screen on the mixer’s LCD.

2.  Turn the SELECT encoder to adjust trim for the input. The trim gain is dis

-

played on the mixer’s LCD.

Pan

Mini-Fader (4-6) 

becomes Trim when 

CL-12 is connected

Trim (1-3)

Adjusting Trim Levels (633 only)

When the CL-12 is attached to the 

633, the mini-faders on the 633 

become dedicated trim controls for 

inputs 4-6. 

To adjust the trim level for 

inputs 4-6:

 

X

Turn the appropriate mini-

fader on the 633. The trim 

gain is displayed on the 

mixer’s LCD via the Input 

Settings screen.

Summary of Contents for 664
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands