Sound Devices 664 User Manual Download

Page: 81 / 183

FILE STORAGE

File Storage Settings

The following table provides the File Storage settings and available options.

menu

escription

ptions

Take List

Accesses the Take List. See

Take List

Overview

for more details.

File List

Accesses the File List.

Folder Options

Sets options for folder structure with up

to three levels of hierarchy.

•

Top-Level

•

Mid-Level

•

Bottom-Level

Sound Report Info

Enter information to be included in Sound

Report headers.

•

Project

• Producer

• Director

• Job

• Date

•

Location

• Sound Mixer

• Phone

• E-Mail

•

Client

•

Boom Op

•

Prod. Co.

•

Prod. Co. Tel.

• Mics

•

Comments

• Roll

• Media

•

File Type (CF)

•

File Type (SD)

•

Sample Rate

•

Frame Rate

•

Bit Depth

•

Tone Level

File Max Size

Selects the file size at which a recording

will close automatically, and then start a

new file.

•

4GB

•

2GB

•

1GB

•

640MB

•

512MB

Scene Increment Mode

Enables or disabled the scene increment

shortcut and selects which format the

scene increment will use.

• Disabled

•

Character

•

Numeric

Take Reset Mode

Defines when take number is reset.

•

Never

•

Scene Change

•

Daily Folder Change

•

Either Scene or Daily

File Playback Mode

Determines what (if any) playback action

the 664 will perform upon reaching the

end of a file during playback.

•

Play Once

•

Play All

•

Repeat One

• Repeat All

Default Playback Card

The source media that files will be played

from when playback is initiated.

•

• SD

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands