Sound Devices 664 User Manual Download Page 13

Page: 13 / 183

OVERVIEW OF CHASSIS

Right Side Panel

10-pin A and C

SD Card Slot

CompactFlash Slot

USB B Connector

Battery Compartment

Timecode I/O

DC Input

Main Outputs

RTN B Input

Tape Output

Link I/O

TA3 Master Outputs

X1 and X2 Outputs

eature

escription

USB B Connector

Factory use and keyboard connection (with adapter).

CompactFlash Slot

Accepts approved CompactFlash cards with the label-side toward the

rear of the mixer. Compatible with Type I and Type II cards. High-

speed UDMA cards are recommended for higher track count recording.

10-pin A and C

Each connection includes a pair of transformer-isolated Outputs and

a stereo unbalanced Return input. Analog Output levels are selected

between Line, -10, and Mic levels in Main menu OUTPUTS section.

10-pin A outputs can be set to AES Outputs 5,6 and 7,8 in Main menu

OUTPUTS section.

X1 and X2 Outputs

Line, -10, or Mic level selected in Main menu OUTPUTS section.
[Pin 1 = ground, pin 2 = hot (+), pin 3 = cold (-). Float pin 3 to unbal

ance.]

TA3 Master Outputs

LR balanced output: Line, -10, or Mic level selected in Main menu OUT

PUTS section.
[Pin 1 = ground, pin 2 = hot (+), pin 3 = cold (-). Float pin 3 to unbal

ance.]

Link I/O

Used to link together additional Sound Devices mixers (664, 552, 442,

302, or MixPre-D).
[Pin 1 = headphone left, pin 2 = headphone right, pin 3 = mix right,

pin 4 = mix left, pin 5 = link detection/ground.]

SD Card Slot

Accepts SD/SDHC/SDXC cards with the notched corner oriented to

ward the top of the 664. High speed class 10 cards are recommended.

Insert until it clicks securely in the slot. The card should glide smoothly

into the slot. Press to eject.

Timecode I/O

Timecode input and output on 5-pin LEMO® connector.

Tape Outputs

Unbalanced stereo, tape level output on TA3 and 3.5 mm connectors.
[TA3: Pin 1 = ground, pin 2 = left, pin 3 = right

3.5 mm: Sleeve = ground, tip = left, ring = right]

RTN B Input

Unbalanced stereo 3.5 mm female connector for Return B audio input.
[Sleeve = ground, tip = left, ring = right]

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands