Sound Devices 664 User Manual Download Page 141

Page: 141 / 183

141

Topics in this section include:

Specifications

Various product specifications for

the 664 are provided here for your

convenience. They relate to inputs

and outputs, powering, environmental

parameters, as well as physical aspects

of the mixer.
Specifications are subject to change

without prior notice.

For the latest information available on

all Sound Devices products, visit our

website at:

www.sounddevices.com

ame

escription

Frequency Response

10 Hz to 50 kHz ± 0.5 dB

THD + Noise

0.09% max (1 kHz, 22 Hz–22 kHz BW, fader at 0, 0 dBu output)

Equivalent Input Noise

-126 dBu (-128 dBV) maximum. (22 Hz - 22 kHz bandwidth, flat filter, trim

control fully up)

Inputs

XLR Mic: Active-balanced for use with ≤600 ohm mics

XLR Line: Active-balanced for use with ≤2k ohm outputs

RTN A, B, C (3.5 mm/10-pin): Unbalanced stereo for use with ≤2k ohm out

puts

Link I/O: Unbalanced stereo for linking to Sound Devices 664, MixPre-D, 302,

442, and 552.

Input Impedance (ohms

actual)

XLR Mic: 4k ohms

XLR Line: 10k ohms

RTN A, B, C (3.5 mm/10-pin): 30k ohms

Link I/O: 2k ohms

Input Clipping Level

0 dBu minimum (trim control fully down)

Maximum Input Level

XLR-3F Mic: 0 dBu (0.78 Vrms)

XLR-3F Line: +40 dBu (80 Vrms)

RTN A, B, C (3.5 mm/Multi-pin): +24 dBu (12.4 Vrms)

Link I/O: +6 dBu (1.5 Vrms)

Input Limiters

+16 dBu threshold

20:1 limiting ratio

1 mS attack time

500 mS release time

Analog Inputs

Digital Inputs

Analog Outputs

Digital Outputs/Recorder

Timecode and Sync

Power

Environmental

Dimensions and Weight

Analog Inputs

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Brands by name

Popular brands