manualshive.com logo in svg

Sony PCG-SRX99K VAIO User Guide (primary manual), User Manual, Page: 99 / 217

Share
Download
Sony PCG-SRX99K VAIO User Guide (primary manual) User Manual Download Page 99

Frequently asked questions 

Why doesn't the Unplug or Eject Hardware icon 

appear on the taskbar when the drive is connected? 

The computer does not recognize that the floppy disk drive is connected to the computer. First, make sure the USB

connector is properly inserted into the USB port 

. If you need to secure the connection, wait a few moments for the

computer to recognize the drive. If the icon still does not appear, follow these steps: 

1.

Close all programs that were opened from the disk and wait for the LED indicator to turn off. 

2.

Push the Eject button, and remove the disk. 

3.

Reconnect the floppy disk drive by inserting the USB connector (with the USB icon 

facing upward) into the USB

port 

. 

4.

Restart the computer by clicking 

Start

 on the Windows

®

 taskbar, and 

Turn Off Computer

, then 

Restart

. 

Why is the drive unable to write data to a floppy disk? 

The floppy disk drive cannot write data to a disk if it is inserted into the drive improperly. See 

Inserting and removing floppy

disks

 for instructions on how to insert the disk properly. 

If the disk is inserted properly and you are still unable to write data to it, the disk may be write-protected. You can either
use a floppy disk that is not write-protected or disable the write-protect feature. 

Page 99

Summary of Contents for PCG-SRX99K VAIO User Guide (primary manual)


























































































































































































































Reviews:

No comments