manualshive.com logo in svg

Sony PCG-SRX99K VAIO User Guide (primary manual), User Manual, Page: 110 / 217

Share
Download
Sony PCG-SRX99K VAIO User Guide (primary manual) User Manual Download Page 110

Using a digital video camera recorder 

Your computer comes with preinstalled driver software that is compatible with most Sony digital video camera recorders. If
you purchased a camera that comes with its own driver software, install these drivers before you use the camera. 

To view images 

You can view the images captured by your digital video camera recorder three different ways. Select one set of instructions
from the following list: 

If your digital video camera recorder is compatible with the preinstalled software, the 

Digital Video Device

 window

appears when you connect the camera to the computer. Select the program you want to use in this window, and
click 

OK

. 

Click

 Start

, and click 

All Programs

. Select a software program in which to view your images. 

Click 

Start

, and click 

Experience VAIO

. Click 

Movies

, and select a program in which to view your images. 

Page 110

Summary of Contents for PCG-SRX99K VAIO User Guide (primary manual)


























































































































































































































Reviews:

No comments