manualshive.com logo in svg

Sony PCG-SRX99K VAIO User Guide (primary manual), User Manual, Page: 214 / 217

Share
Download
Sony PCG-SRX99K VAIO User Guide (primary manual) User Manual Download Page 214

Troubleshooting the LCD screen 

Why did the computer (LCD) screen go blank? 

Your computer screen may go blank if the computer has lost power or is in a power saving mode (Standby or
Hibernate). 

Make sure the computer is plugged into a power source and is on. The power indicator on the computer will
be on if the computer is on. 

Make sure the battery is inserted properly and is charged. 

If the computer is in LCD (Video) Standby mode, press any key to activate the computer screen. 

If the display mode is set to external display (such as TV), press and hold 

Fn

 while you press 

F7

 several times. 

Why don't my changes appear on the computer (LCD) screen? 

You may need to refresh the computer screen. Press the Windows key 

and press 

D

 twice. 

Page 214

Summary of Contents for PCG-SRX99K VAIO User Guide (primary manual)


























































































































































































































Reviews:

No comments