manualshive.com logo in svg

Sony PCG-SRX99K VAIO User Guide (primary manual), User Manual, Page: 7 / 217

Share
Download
Sony PCG-SRX99K VAIO User Guide (primary manual) User Manual Download Page 7

Inserting a battery 

To insert a battery 

1.

Turn the computer over, and slide the 

LOCK/UNLOCK

 switch on the bottom of the computer to the 

UNLOCK

position. 

2.

Align the grooves and tabs on the battery with those on the back of the computer. 

  Inserting a Battery 

3.

Slide the battery into the computer until it clicks into place. 

4.

Slide the 

LOCK/UNLOCK

 switch into the 

LOCK

 position. 

  

 If the port replicator is attached to your computer, do not insert or remove the battery. Lifting and turning the

computer with the port replicator attached could cause a temporary loss of power. 

Some software programs and peripheral devices prevent the system from entering Hibernate mode. If you are using a
program that prevents the system from entering Hibernate mode, save your data frequently. See 

Using power saving

modes

 for information on how you can manually activate a power saving mode. 

Page 7

Summary of Contents for PCG-SRX99K VAIO User Guide (primary manual)


























































































































































































































Reviews:

No comments