Sony PCG-SRX99K VAIO User Guide (primary manual) User Manual Download Page 181 | Manualshive

Page: 181 / 217

background image

Legal Information

SONY ELECTRONICS INC. PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER
INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION.
IN NO EVENT SHALL SONY ELECTRONICS INC. BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES,
WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE
SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Sony Electronics Inc. reserves the right to make any modification to this manual or the information contained herein at any
time without notice. The software described herein is governed by the terms of a separate user license agreement.

This product contains software owned by Sony and licensed by third parties. Use of such software is subject to the terms
and conditions of license agreements enclosed with this product. Some of the software may not be transported or used
outside the United States. Software specifications are subject to change without notice and may not necessarily be
identical to current retail versions.

Updates and additions to software may require an additional charge. Subscriptions to online service providers may require
a fee and credit card information.

Certain software product(s) included with this computer may include features such as copy protection and content
management technology.

USE OF THE SOFTWARE PRODUCT(S) REQUIRES AGREEMENT TO APPLICABLE END USER AGREEMENTS AND FULL COMPLIANCE
WITH APPLICABLE PRODUCT ACTIVATION PROCEDURES. Product activation procedures and privacy policies will be detailed
during initial launch of the software product(s), or upon certain reinstallations of the software product(s) or reconfigurations
of the computer, and may be completed by Internet or telephone (toll charges may apply).

© 2002 Sony Electronics Inc. Reproduction in whole or in part without written permission is prohibited. All rights reserved.
Sony, VAIO, the VAIO logo, DVgate, Handycam, MovieShaker, i.LINK, ImageStation, Net MD, Network Walkman, MagicGate,
Memory Stick, MICROMV, OpenMG, SonicStage, Giga Pocket, Click to DVD, PictureGear, and ATRAC3 are trademarks or
service marks of Sony. Microsoft, Windows, and Windows Media are trademarks or registered trademarks of the Microsoft
Corporation.

All other trademarks are trademarks or registered trademarks of their respective owners.

Page 181

«
...
179
180
181
182
183
...
»

Summary of Contents for PCG-SRX99K VAIO User Guide (primary manual)


























































































































































































































Reviews:

No comments

Related manuals for PCG-SRX99K VAIO User Guide (primary manual)

Brand: NEC Pages: 28

Brand: IBM Pages: 462

Brand: IBM Pages: 52

Brand: Yawarra Pages: 4

Brand: ASROCK Pages: 43

POWERMATE - VERSION 2008

Brand: NEC Pages: 32

dc5800 - Microtower PC

Brand: Compaq Pages: 69

Brand: Radio Shack Pages: 408

AE1900-01SUS - Wind Top - 1 GB RAM

Brand: MSI Pages: 42

9120A4U - ThinkCentre A61 - 9120

Brand: Lenovo Pages: 66

Brand: Lenovo Pages: 76

Brand: Lenovo Pages: 64

Brand: Lenovo Pages: 98

Brand: Lenovo Pages: 86

Brand: Lenovo Pages: 112

Brand: Lenovo Pages: 42

SIMATIC VPU200-3104

Brand: Siemens Pages: 28

SIMATIC Rack PC IL 40

Brand: Siemens Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands