Sony PCG-SRX99K VAIO User Guide (primary manual) User Manual Download Page 35

Page: 35 / 217

To disconnect from a wireless network



For computers with built-in wireless LAN functionality:

Click

Start

, point to

Settings

, and click

Network and Dial-up Connections

Right-click the appropriate

Local Area Connection

network icon, and select

Disable

Move the Wireless LAN switch to

OFF

. The Wireless LAN indicator turns off.



For wireless LAN PC Card connections:

Click

Start

, point to

Settings

, and click

Network and Dial-up Connections

Right-click the appropriate

Local Area Connection

network icon, and select

Disable

Correctly remove the PC Card. See

Inserting PC Cards

for more information.

Turning off the wireless LAN functionality while accessing remote documents, files, or resources may

result in data loss.

Page 35

Summary of Contents for PCG-SRX99K VAIO User Guide (primary manual)


























































































































































































































Search results

Summary of Contents for PCG-SRX99K VAIO User Guide (primary manual)

Reviews:

Sony PCG-SRX99K VAIO User Guide (primary manual), User Manual, Page: 35 / 217

Search results

Summary of Contents for PCG-SRX99K VAIO User Guide (primary manual)

Reviews: