Sony PCG-SRX99K VAIO User Guide (primary manual) User Manual Download Page 208

Page: 208 / 217



Make sure the battery is inserted properly and is charged.



If the computer is in LCD (Video) Standby mode, press any key to activate the computer screen.



If the display mode is set to external display, press and hold the

key while you press

several times.

Why don't my changes appear on the computer (LCD) screen?

You may need to refresh the computer screen. Press the Windows key

and press

twice.

Page 208

Summary of Contents for PCG-SRX99K VAIO User Guide (primary manual)


























































































































































































































Search results

Summary of Contents for PCG-SRX99K VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-SRX99K VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-SRX99K VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-SRX99K VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-SRX99K VAIO User Guide (primary manual)

Brands by name

Popular brands