28
4-5
2
3
4
6
7
8
9
9e
9d
9c
9b
9a
1
5
Full Diagnostic
Balance with
Ruonout
Balance
Balance no
Spokes
Manual
10
11
Layout
4.1.2 Screen pages & Commands
The Display fi eld shows the main
Operating Screen
Pages
:
Each Screen Page contains basic commands, located
at the bottom in the Commands Field. Further com-
mands may be positioned in other parts of the screen,
with specifi c Screen Pages and operating phases.
Fig. 4-5
INTRO SCREEN
Basic screen / Main menu.
This is the initial Screen Page, activated immediately
after starting the machine. It can be reached from any
other Screen Page in the program using the HOME key.
Commands:
1 -
FULL DIAGNOSTIC
- The balancer performs in
addition diagnosis of the tire. A three-dimensional
reconstruction of the wheel on the screen and the
use of identifi cation colors allow the operator to see
features such as the uniformity and wear of the tread
and the presence of possible faults on the wheel.
2 -
BALANCE WITH RUN OUT key
- For selecting
the automatic (complete) balancing program, machine
performs tyre run-out and possibly rim run-out.
3 -
BALANCE
- Selects the automatic (complete)
balancing program.
4 -
BALANCE NO SPOKES
- Selects the automatic
balancing program, excluding the spoke identifi cation
process.
5 -
MANUAL Data Entry
- Selects the manual
balancing program.
6 -
HELP key
- Selects HELP texts for the current
function (
F
4.3).
7 -
BALANCING key
- Opens the BALANCING Screen
Page.
8 -
VEHICLE key
- Allows selections; MOTORCYCLE (only
Manual), SPORTS CAR, TRUCK, SUV, CAR (
F
6.1.1).
9 -
SETTINGS MENU key
- Opens the Settings Menu.
9a-
PRINT key
- Generates a print-out (If enabled)
9b-
SETTINGS key
- Opens the SETTINGS Screen Page.
9c-
CUSTOMER DATA ENTRY key
- Opens the
Customer Data Entry Screen Page (
F
9.7).
9d-
USER CALIBRATION key
- Starts User Calibration.
9e-
COMPENSATION RUN key
- Retrieves the
Compensation Run.
10 -
PRESSURE key
- Change the pre-set Infl ation
Pressure value.
11 -
Rim
Data Imput
- Opens the Manual Data Entry
Screen
..
_
..........
