198
8
A
8
8
7-55
8
7-52
7-54
7-53
7-54b
Operation
Fig. 7-52
MINIMISATION “7”,
outside
—
Rotate the wheel into marking position following the
arrows.
—
In this position provide a
double mark
on the tyre
outer side
exactly perpendicular to and above the
main shaft.
—
Confi rm by pressing key
8
.
The MINIMISATION “8” screen (
Fig. 7-54
) is displayed.
Fig. 7-53
MINIMISATION “7”,
inside
If the tyre
cannot
be turned over on the rim (e.g.:
Asymmetrical and Directional),
press key
(
A
,
Fig. 7-53
), then
continue as shown on screen MINIMISATION
“7”
outside
(
Fig. 7-52
).
If the wheel can be turned over on the rim;
—
Rotate the wheel into marking position following the
arrows.
—
In this position provide a
double mark on the tyre
,
on the
inside
of the wheel, exactly above the main
shaft.
—
Turn over
the tyre on the rim (tyre changer).
—
Confi rm by pressing key
8
.
The MINIMISATION “8” screen (
Fig. 7-54b
) is
displayed.
Fig. 7-54b
MINIMISATION “8”
—
Readjust the tyre on the rim such that the double
mark coincides with the valve (use tyre changer).
—
Confi rm by pressing key
8
.
The MINIMISATION “9” screen (
Fig. 7-55
) is displayed.
..
_
..........
