196
7-47.b
7-49
7-48
7-50
7-51
8
8
8
Operation
Fig. 7-47b
MINIMISATION “
3
”
—
Rotate the wheel into marking position following
the arrows.
—
In this position
mark
the tyre, on the outer side of
the wheel, precisely above the main shaft.
—
Confi rm by pressing the key
8
.
The MINIMISATION “4” screen (
Fig. 7-48
) is displayed.
Fig. 7-48 MINIMISATION “4”
—
On the tyre changer, turn the tyre relative to the
rim until the valve is aligned with the mark made
on the tyre.
—
Confi rm by pressing the key
8
.
The MINIMISATION “5” screen (
Fig. 7-49
) is displayed.
Fig. 7-49 MINIMISATION “5”
—
Clamp the wheel on the balancer.
—
Rotate the wheel such that the valve is exactly
perpendicular to and above the main shaft.
—
Enter the valve position by pressing the key
8
.
The MINIMISATION “6” screen (Fig. 7-50) is
displayed.
Fig. 7-50 MINIMISATION “6”
START is signalled on the screen.
—
Spinn the wheel.
A measuring run is performed.
The screen MINIMISATION “7”, outside (
Fig. 7-51
)
or the screen MINIMISATION “7”, inside (
Fig. 7-53
)
is displayed.
Reading H 0
Optimum condition has been achieved and cannot be
improved.
Continue as shown on screen BALANCING
(
Fig. 7-43
).
..
_
..........